Geekworm 7 Inch 1027 x 600 HD Capacitive Touch Screen with Case for Raspberry Pi 3 Model B, 2B, B+ / Beaglebone Black / Banana


Free Shipping

Overview and Specifications:

This is a universal IPS HDMI Display, 1024 × 600 resolution with tempered glass capacitive screen touch panel.
Not only supports Raspberr Pi, but also supports Banana Pi, Beaglebone, ect.
This screen can be used as a computer monitor, supports windows10.

7inch IPS screen;
1024×600 hardware resolution, onfigurable by software (up to 1920×1080);
Toughened glass capacitive touch panel, 6H hardness;
Supports popular mini PC such as Raspberry Pi, BB Black, Banana Pi;
Supports Raspbian, Ubuntu, WIN 10 IOT, single touch and driver free;
Multi languages OSD menu, for power management, brightness/contrast adjustment, etc
3.5mm audio jack; 
Supports HDMI audio output;
Supports VGA input;
With high quality PC case, optional tilt angle: 30°/50°

Packing List:
1 x 7inch Screen
1 x ABS Case
1 x HDMI Cable (30cm length)
1 x USB Cable (38cm length)

User Manual & more details:
Please refer to the [Downlaod Link]

1/ Why the LCD doesn't work with my Raspbian? 
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. 
However, for the first testing, you may want to use our provided image directly. 
2/ Why the LCD still doesn't work with the Waveshare provided image? 
Make sure the hardware connection is correct and connects fine. 
Make sure the image in TF card is burnt correctly. 
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, 
it is possible that the image was burnt incorrectly OR the TF card was in bad contact. 
3/ Which power supply should I use? 
It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.