Ultrasonic Animal Repeller Outdoor Solar Powered With Motion Sensor Cat Dog Deer Bird Repellent Control Garden Chaser – Green


Free Shipping

Overview and Specifications:


1. The product uses an infrared pyroelectric sensor. The sensitivity of the sensor to the animal is related to the direction of motion, and is insensitive to radial motion response, and is most sensitive to cross-cut motion. Means: If the animal is stationary or straight to the product, without cross-cutting, the infrared is not sensed, and the product cannot work on the animal.

2. It uses the principle of infrared detection to emit small waves while driving small animals to drive small animals. It protects your property, your garden and your courtyard from harassment by nasty stray dogs, stray cats and other small animals.
Because it is a portable design product, it can be installed in your home, garden, or anywhere in the courtyard. This product can be used with a low-voltage power supply. This product is only used to drive animals without any chemicals. It emits ultrasonic frequency. They are expelled away. There will be no harm to the human body.
1) Speaker: This product can emit high frequency to drive away animals.
2) PIR motion detector: This is an infrared sensor that continuously outputs signals. When it senses that a moving animal is in the detection range, it will automatically emit sound waves to drive the animals and the LEDs will light up.
3) When the infrared sensor senses that the animal is far away, the LED indicator will automatically go out.
4) The product has new lighting flashing and sound, frequency adjustment, sensitivity adjustment function, driving animals more targeted and better.

5-speed frequency adjustment:

0 file: OFF

1st gear: 13.5KHZ-19.5KHZ, mainly for rats, dogs, rabbits, foxes, baboons and other animals.

2 files: 19.5KHZ-24.5KHZ, mainly for cats, raccoons, badgers, skunk and other animals.

3 files: 24.5KHZ-45.5KHZ, mainly for bats, birds, mice and other animals.

4 files: LED strong flash, can drive away snakes, raccoons, boars, cockroaches and other animals.

5 files: LED lights burst 5.50KHZ, the whole band drives animals and lights flash. All functions work at the same time, the first to fifth gears work in turn, accompanied by strong LED flash.


– Powerful ultrasound to drive animals. When the animal enters the area, the infrared sensor detector is triggered and the product emits ultrasonic waves that make the animal feel uncomfortable and escape from the area.

– LED strong flash to drive the animals. When the animal enters the area, the infrared sensor detector is triggered and the product emits a strong LED flash that causes the animal to be scared and flee the area.

Function Description

– “Sensitivity” button (left): Sensitivity and sensing distance are adjustable. Rotate the knob clockwise to increase the range of protection.

– “Frequency” button (right): This button is used to adjust the ultrasonic frequency. Rotate the knob clockwise and the ultrasonic frequency gradually increases.

Installation Notes

1. Open the battery cover on the back, install 3 AA rechargeable batteries, and close the battery cover. (Battery is included as standard, this step can be omitted)

2. Place the product in the area that needs to be protected. (such as flower beds or walls, etc.)

3. Please choose a suitable orientation to ensure that the top solar panel can absorb solar energy to the maximum extent.

4. If the product is installed underground, insert the grounding rod carefully into the soil. (Please see the picture). Please insert the grounding rod to the ground about 12cm. (Please see Figure 2). It is recommended that the ground be dug well before inserting the product carefully to protect the product from damage.

5. The product can be inserted in the soil, can be hung on the wall, or placed in other flat locations.


● Infrared sensing angle: 110 degrees

● Sensing distance: 9-10 meters, depending on the size of the animal. (The larger the animal, the farther it is.)

● Power supply mode: Solar powered, 3*AA rechargeable battery, or powered by 9V 200mA adapter.

● When the adapter is linked, the product works, but the infrared sensor detector does not work.

● In case of long-term rainy weather, you can use the adapter to charge.

● Red LED light is on: the product senses the animal.

About the battery

1. If the battery has not been used for a long time (1 month), the battery may run out. It is recommended to use the battery after it has been fully charged 3-5 times.

2. After the battery has been used for a certain period of time, the life will change and it will fill up quickly. Please replace the battery at this time.

3. If the battery cannot be used for a long time, please replace 3 AA 1.2V rechargeable batteries (Ni-Cd or Ni-MH). The better the battery quality, the better the power and the better the results.


1 Sometimes humans can perceive some ultrasound. Keep the product away from the living area. Do not place the product in areas where infants and children are active.

2 Do not block the infrared sensor detector. When cleaning the product, clean it with a soft cloth and soap. Do not use chemicals or corrosive objects to clean the product to prevent damage.


Single product size: 15*6*16CM
Plunger length: 15.5CM
Single weight: 0.4kg
Color box size: 15.6*15*9.5CM
Battery material: rechargeable NiMH AA battery
Package contents: 1 finished machine, 1 USB cable, 1 aluminum alloy tube, 1 bracket, 1 English amp, Japanese manual